1.2.1.输入:100-240VAC 50/60Hz Page 1
输出:3-48VDC功率3-300W
1.2.2.功能特性:短路保护、过载保护、防雷击
符合RoHS&WEEE环保、CEC节能指令
符合EMC、FCC电磁兼容
1.2.3.环境条件
使用-20~+45℃、10-90%RH
储存-40~+75℃、10-90%RH
1.2.4.标准:UL1012/UL1310/UL60950/FCC PART15
EN60950/EN60335/EN55014/EN55022 |
|||
Part name/产品名: Switching Power Supply 开关电源 |
Model No./ 型号: |
||
Design No./设计编号: |
Customer Code 客户代码:
|
||
Customer Product No. 客户产品编号: |
Date/日期 : |
||
SCOPE/描述:
This document details the electrical,mechanical and environmental,it is a Switching Power
Supply of 0-48V;0-15A;300Watts output,when 100V~240 VAC input,
本文明确了产品的电性规格,机械尺寸,环境条件,该产品输入电压范围100V~240 VAC,输出
电压为:0-48V;0-15A;200瓦的开关电源 |
|||
1.Electrical Characteristics/电器特性: |
|||
Items/项目 |
Specification/规格 |
Remarks/备注 |
|
Input/输入: |
|||
Input rated voltage /输入额定电压 |
100-240 VAC |
|
|
Input rated frequency/输入额定频率 |
50/60 Hz |
|
|
Input range current /输入额定电流 |
1.5AMAX(最大) |
At 100VAC/60Hz,在100VAC/60Hz情况下 |
|
Efficiency/效率 |
80 % MIN(最小) |
At full load and within input rated voltage
在满载和额定输入情况下 |
|
Input protection/输入保护: |
Rated Fuse 3.15A/250 VAC |
保险丝额定值 3.15A/250 VAC
Approval by 有认证 |
|
Output/输出: |
|||
Output voltage / 输出电压 |
0-48V + 5% VDC |
No load/空载 |
|
0-48V + 5% VDC |
Full load/满载 |
||
Output current/输出电流 |
0-15A |
Maximum loading current
最大负载电流 |
|
Output protection/输出保护: |
|||
Over current
过载保护 |
No odor, smoke, fire, plastic deformation, and excessive heat happen. 无气味, 冒烟, 冒火,塑胶变形, 过热. |
The products are out of working when over current.
过载时,产品不工作。 |
|
Short-circuit
短路 |
No odor, smoke, fire, plastic deformation, and
excessive heat happen. 无气味, 冒烟, 冒火,塑胶变形, 过热. |
Short-circuit output for 1 minute.
输出短路1分钟. |
|
Safety Standard/安规标准 |
|||
■ UL/CUL ■ CSA ■ PSE ■ GS ■ CE GS mark is accredited by TUV □ CB □ BS ■ SAA □ CCC ■ K-Mark □ PSB |
|||
EMC Standard/电磁兼容: |
|||
□ FCC □ C-Tick □ VCCI □ BSMI □ CE/ EMC |
|||
Others/其他: |
|||
Hi-pot Test (Primary to Secondary)
高压测试(初级对次级) |
1500VAC/10mA/1 minute |
The voltage applied to the insulation under test is gradually raised from zero to the prescribed voltage and held at that value for 60 S. 测试电压是逐渐从0上调至规定的电压值并保持60 秒. |
|
RELIABILITY/可靠度: |
|||
Burn-In/烧机:100%burn-in test at 80-100%of full rated load at 35-40℃burn-in room,input voltage 220 VAC,48 hrs test for samples,24 hrs test for pilot run samples 4 hrs test for mass production.100%烧机测试在负载为80-100%状况,烧机房温度为35-40℃,输入电压为220 VAC;工程样品测试时间为48小时,导航样品为24小时,批量产品为4小时。 |
|||
Temperature rise/温升:In environmental temperature at 25 degrees.The maximum temperature rise measured at any point on the enclosure surface shall not exceed 50 degrees in closed carton chamber and no air flow.在环境温度为25度下,外壳表面任意一点它的最高温升不超过50度,实验品是置于封闭的空气不流通的容器中进行. |
|||
2.Mechanical Characteristics/机械特性: |
|||
Items/项目 |
Specification/规格 |
Remarks/备注 |
|
Dimension/尺寸 |
116*63*38mm only FYI |
Length*Width*Height/长*宽*高 |
|
Case Material/外壳材料 |
PC,PC+ABS, or equivalent |
Desk top/桌上型 |
|
Input Plug/输入插头 |
18AWG SPT-2 105℃ 2PIN UL POLARITY |
BLADE / 1200 + 100mm |
|
Output Cord/输出线 |
18AWG SPT-1 105℃ / 1500+100mm |
DC头 |
|
Connector polarity/连接器极性 |
|
5.5*2.1*11 mm only FYI |
|
Color/颜色 |
Black |
Fine texture/颜色均匀无色差。 |
|
Drop test/跌落试验 |
One time Per side, at one meter. 1米一次, 每个面。
After test, unit is not broken, disassembled, or damaged to access hazardous parts.
测试后,产品不可以损坏,裂开或者可以触到危险部件。 |
||
3.Environmental Characteristics/环境特性: |
|||
Storage temperature/存储温度 |
-20 to +60 degrees centigrade(摄氏度) |
|
|
Operating temperature/操作温度 |
0 to +40 degrees centigrade. (摄氏度) |
|
|
Storage RH range/相对存储湿度 |
5 to 95% |
RH: Relative humidity/相对湿度 |
|
Operating RH range/相对操作湿度 |
20 to 85% |
|
|
Approved by: 核准审核制作 |
|||
1.2.1.输入:100-240VAC 50/60Hz Page 1
输出:3-48VDC功率3-300W
1.2.2.功能特性:短路保护、过载保护、防雷击
符合RoHS&WEEE环保、CEC节能指令
符合EMC、FCC电磁兼容
1.2.3.环境条件
使用-20~+45℃、10-90%RH
储存-40~+75℃、10-90%RH
1.2.4.标准:UL1012/UL1310/UL60950/FCC PART15
EN60950/EN60335/EN55014/EN55022 |
|||
Part name/产品名: Switching Power Supply 开关电源 |
Model No./ 型号: |
||
Design No./设计编号: |
Customer Code 客户代码:
|
||
Customer Product No. 客户产品编号: |
Date/日期 : |
||
SCOPE/描述:
This document details the electrical,mechanical and environmental,it is a Switching Power
Supply of 0-48V;0-15A;300Watts output,when 100V~240 VAC input,
本文明确了产品的电性规格,机械尺寸,环境条件,该产品输入电压范围100V~240 VAC,输出
电压为:0-48V;0-15A;200瓦的开关电源 |
|||
1.Electrical Characteristics/电器特性: |
|||
Items/项目 |
Specification/规格 |
Remarks/备注 |
|
Input/输入: |
|||
Input rated voltage /输入额定电压 |
100-240 VAC |
|
|
Input rated frequency/输入额定频率 |
50/60 Hz |
|
|
Input range current /输入额定电流 |
1.5AMAX(最大) |
At 100VAC/60Hz,在100VAC/60Hz情况下 |
|
Efficiency/效率 |
80 % MIN(最小) |
At full load and within input rated voltage
在满载和额定输入情况下 |
|
Input protection/输入保护: |
Rated Fuse 3.15A/250 VAC |
保险丝额定值 3.15A/250 VAC
Approval by 有认证 |
|
Output/输出: |
|||
Output voltage / 输出电压 |
0-48V + 5% VDC |
No load/空载 |
|
0-48V + 5% VDC |
Full load/满载 |
||
Output current/输出电流 |
0-15A |
Maximum loading current
最大负载电流 |
|
Output protection/输出保护: |
|||
Over current
过载保护 |
No odor, smoke, fire, plastic deformation, and excessive heat happen. 无气味, 冒烟, 冒火,塑胶变形, 过热. |
The products are out of working when over current.
过载时,产品不工作。 |
|
Short-circuit
短路 |
No odor, smoke, fire, plastic deformation, and
excessive heat happen. 无气味, 冒烟, 冒火,塑胶变形, 过热. |
Short-circuit output for 1 minute.
输出短路1分钟. |
|
Safety Standard/安规标准 |
|||
■ UL/CUL ■ CSA ■ PSE ■ GS ■ CE GS mark is accredited by TUV □ CB □ BS ■ SAA □ CCC ■ K-Mark □ PSB |
|||
EMC Standard/电磁兼容: |
|||
□ FCC □ C-Tick □ VCCI □ BSMI □ CE/ EMC |
|||
Others/其他: |
|||
Hi-pot Test (Primary to Secondary)
高压测试(初级对次级) |
1500VAC/10mA/1 minute |
The voltage applied to the insulation under test is gradually raised from zero to the prescribed voltage and held at that value for 60 S. 测试电压是逐渐从0上调至规定的电压值并保持60 秒. |
|
RELIABILITY/可靠度: |
|||
Burn-In/烧机:100%burn-in test at 80-100%of full rated load at 35-40℃burn-in room,input voltage 220 VAC,48 hrs test for samples,24 hrs test for pilot run samples 4 hrs test for mass production.100%烧机测试在负载为80-100%状况,烧机房温度为35-40℃,输入电压为220 VAC;工程样品测试时间为48小时,导航样品为24小时,批量产品为4小时。 |
|||
Temperature rise/温升:In environmental temperature at 25 degrees.The maximum temperature rise measured at any point on the enclosure surface shall not exceed 50 degrees in closed carton chamber and no air flow.在环境温度为25度下,外壳表面任意一点它的最高温升不超过50度,实验品是置于封闭的空气不流通的容器中进行. |
|||
2.Mechanical Characteristics/机械特性: |
|||
Items/项目 |
Specification/规格 |
Remarks/备注 |
|
Dimension/尺寸 |
116*63*38mm only FYI |
Length*Width*Height/长*宽*高 |
|
Case Material/外壳材料 |
PC,PC+ABS, or equivalent |
Desk top/桌上型 |
|
Input Plug/输入插头 |
18AWG SPT-2 105℃ 2PIN UL POLARITY |
BLADE / 1200 + 100mm |
|
Output Cord/输出线 |
18AWG SPT-1 105℃ / 1500+100mm |
DC头 |
|
Connector polarity/连接器极性 |
|
5.5*2.1*11 mm only FYI |
|
Color/颜色 |
Black |
Fine texture/颜色均匀无色差。 |
|
Drop test/跌落试验 |
One time Per side, at one meter. 1米一次, 每个面。
After test, unit is not broken, disassembled, or damaged to access hazardous parts.
测试后,产品不可以损坏,裂开或者可以触到危险部件。 |
||
3.Environmental Characteristics/环境特性: |
|||
Storage temperature/存储温度 |
-20 to +60 degrees centigrade(摄氏度) |
|
|
Operating temperature/操作温度 |
0 to +40 degrees centigrade. (摄氏度) |
|
|
Storage RH range/相对存储湿度 |
5 to 95% |
RH: Relative humidity/相对湿度 |
|
Operating RH range/相对操作湿度 |
20 to 85% |
|
|
Approved by: 核准审核制作 |
|||
1.2.1.输入:100-240VAC 50/60Hz Page 1
输出:3-48VDC功率3-300W
1.2.2.功能特性:短路保护、过载保护、防雷击
符合RoHS&WEEE环保、CEC节能指令
符合EMC、FCC电磁兼容
1.2.3.环境条件
使用-20~+45℃、10-90%RH
储存-40~+75℃、10-90%RH
1.2.4.标准:UL1012/UL1310/UL60950/FCC PART15
EN60950/EN60335/EN55014/EN55022 |
|||
Part name/产品名: Switching Power Supply 开关电源 |
Model No./ 型号: |
||
Design No./设计编号: |
Customer Code 客户代码:
|
||
Customer Product No. 客户产品编号: |
Date/日期 : |
||
SCOPE/描述:
This document details the electrical,mechanical and environmental,it is a Switching Power
Supply of 0-48V;0-15A;300Watts output,when 100V~240 VAC input,
本文明确了产品的电性规格,机械尺寸,环境条件,该产品输入电压范围100V~240 VAC,输出
电压为:0-48V;0-15A;200瓦的开关电源 |
|||
1.Electrical Characteristics/电器特性: |
|||
Items/项目 |
Specification/规格 |
Remarks/备注 |
|
Input/输入: |
|||
Input rated voltage /输入额定电压 |
100-240 VAC |
|
|
Input rated frequency/输入额定频率 |
50/60 Hz |
|
|
Input range current /输入额定电流 |
1.5AMAX(最大) |
At 100VAC/60Hz,在100VAC/60Hz情况下 |
|
Efficiency/效率 |
80 % MIN(最小) |
At full load and within input rated voltage
在满载和额定输入情况下 |
|
Input protection/输入保护: |
Rated Fuse 3.15A/250 VAC |
保险丝额定值 3.15A/250 VAC
Approval by 有认证 |
|
Output/输出: |
|||
Output voltage / 输出电压 |
0-48V + 5% VDC |
No load/空载 |
|
0-48V + 5% VDC |
Full load/满载 |
||
Output current/输出电流 |
0-15A |
Maximum loading current
最大负载电流 |
|
Output protection/输出保护: |
|||
Over current
过载保护 |
No odor, smoke, fire, plastic deformation, and excessive heat happen. 无气味, 冒烟, 冒火,塑胶变形, 过热. |
The products are out of working when over current.
过载时,产品不工作。 |
|
Short-circuit
短路 |
No odor, smoke, fire, plastic deformation, and
excessive heat happen. 无气味, 冒烟, 冒火,塑胶变形, 过热. |
Short-circuit output for 1 minute.
输出短路1分钟. |
|
Safety Standard/安规标准 |
|||
■ UL/CUL ■ CSA ■ PSE ■ GS ■ CE GS mark is accredited by TUV □ CB □ BS ■ SAA □ CCC ■ K-Mark □ PSB |
|||
EMC Standard/电磁兼容: |
|||
□ FCC □ C-Tick □ VCCI □ BSMI □ CE/ EMC |
|||
Others/其他: |
|||
Hi-pot Test (Primary to Secondary)
高压测试(初级对次级) |
1500VAC/10mA/1 minute |
The voltage applied to the insulation under test is gradually raised from zero to the prescribed voltage and held at that value for 60 S. 测试电压是逐渐从0上调至规定的电压值并保持60 秒. |
|
RELIABILITY/可靠度: |
|||
Burn-In/烧机:100%burn-in test at 80-100%of full rated load at 35-40℃burn-in room,input voltage 220 VAC,48 hrs test for samples,24 hrs test for pilot run samples 4 hrs test for mass production.100%烧机测试在负载为80-100%状况,烧机房温度为35-40℃,输入电压为220 VAC;工程样品测试时间为48小时,导航样品为24小时,批量产品为4小时。 |
|||
Temperature rise/温升:In environmental temperature at 25 degrees.The maximum temperature rise measured at any point on the enclosure surface shall not exceed 50 degrees in closed carton chamber and no air flow.在环境温度为25度下,外壳表面任意一点它的最高温升不超过50度,实验品是置于封闭的空气不流通的容器中进行. |
|||
2.Mechanical Characteristics/机械特性: |
|||
Items/项目 |
Specification/规格 |
Remarks/备注 |
|
Dimension/尺寸 |
116*63*38mm only FYI |
Length*Width*Height/长*宽*高 |
|
Case Material/外壳材料 |
PC,PC+ABS, or equivalent |
Desk top/桌上型 |
|
Input Plug/输入插头 |
18AWG SPT-2 105℃ 2PIN UL POLARITY |
BLADE / 1200 + 100mm |
|
Output Cord/输出线 |
18AWG SPT-1 105℃ / 1500+100mm |
DC头 |
|
Connector polarity/连接器极性 |
|
5.5*2.1*11 mm only FYI |
|
Color/颜色 |
Black |
Fine texture/颜色均匀无色差。 |
|
Drop test/跌落试验 |
One time Per side, at one meter. 1米一次, 每个面。
After test, unit is not broken, disassembled, or damaged to access hazardous parts.
测试后,产品不可以损坏,裂开或者可以触到危险部件。 |
||
3.Environmental Characteristics/环境特性: |
|||
Storage temperature/存储温度 |
-20 to +60 degrees centigrade(摄氏度) |
|
|
Operating temperature/操作温度 |
0 to +40 degrees centigrade. (摄氏度) |
|
|
Storage RH range/相对存储湿度 |
5 to 95% |
RH: Relative humidity/相对湿度 |
|
Operating RH range/相对操作湿度 |
20 to 85% |
|
|
Approved by: 核准审核制作 |
|||
1.2.1.输入:100-240VAC 50/60Hz Page 1
输出:3-48VDC功率3-300W
1.2.2.功能特性:短路保护、过载保护、防雷击
符合RoHS&WEEE环保、CEC节能指令
符合EMC、FCC电磁兼容
1.2.3.环境条件
使用-20~+45℃、10-90%RH
储存-40~+75℃、10-90%RH
1.2.4.标准:UL1012/UL1310/UL60950/FCC PART15
EN60950/EN60335/EN55014/EN55022 |
|||
Part name/产品名: Switching Power Supply 开关电源 |
Model No./ 型号: |
||
Design No./设计编号: |
Customer Code 客户代码:
|
||
Customer Product No. 客户产品编号: |
Date/日期 : |
||
SCOPE/描述:
This document details the electrical,mechanical and environmental,it is a Switching Power
Supply of 0-48V;0-15A;300Watts output,when 100V~240 VAC input,
本文明确了产品的电性规格,机械尺寸,环境条件,该产品输入电压范围100V~240 VAC,输出
电压为:0-48V;0-15A;200瓦的开关电源 |
|||
1.Electrical Characteristics/电器特性: |
|||
Items/项目 |
Specification/规格 |
Remarks/备注 |
|
Input/输入: |
|||
Input rated voltage /输入额定电压 |
100-240 VAC |
|
|
Input rated frequency/输入额定频率 |
50/60 Hz |
|
|
Input range current /输入额定电流 |
1.5AMAX(最大) |
At 100VAC/60Hz,在100VAC/60Hz情况下 |
|
Efficiency/效率 |
80 % MIN(最小) |
At full load and within input rated voltage
在满载和额定输入情况下 |
|
Input protection/输入保护: |
Rated Fuse 3.15A/250 VAC |
保险丝额定值 3.15A/250 VAC
Approval by 有认证 |
|
Output/输出: |
|||
Output voltage / 输出电压 |
0-48V + 5% VDC |
No load/空载 |
|
0-48V + 5% VDC |
Full load/满载 |
||
Output current/输出电流 |
0-15A |
Maximum loading current
最大负载电流 |
|
Output protection/输出保护: |
|||
Over current
过载保护 |
No odor, smoke, fire, plastic deformation, and excessive heat happen. 无气味, 冒烟, 冒火,塑胶变形, 过热. |
The products are out of working when over current.
过载时,产品不工作。 |
|
Short-circuit
短路 |
No odor, smoke, fire, plastic deformation, and
excessive heat happen. 无气味, 冒烟, 冒火,塑胶变形, 过热. |
Short-circuit output for 1 minute.
输出短路1分钟. |
|
Safety Standard/安规标准 |
|||
■ UL/CUL ■ CSA ■ PSE ■ GS ■ CE GS mark is accredited by TUV □ CB □ BS ■ SAA □ CCC ■ K-Mark □ PSB |
|||
EMC Standard/电磁兼容: |
|||
□ FCC □ C-Tick □ VCCI □ BSMI □ CE/ EMC |
|||
Others/其他: |
|||
Hi-pot Test (Primary to Secondary)
高压测试(初级对次级) |
1500VAC/10mA/1 minute |
The voltage applied to the insulation under test is gradually raised from zero to the prescribed voltage and held at that value for 60 S. 测试电压是逐渐从0上调至规定的电压值并保持60 秒. |
|
RELIABILITY/可靠度: |
|||
Burn-In/烧机:100%burn-in test at 80-100%of full rated load at 35-40℃burn-in room,input voltage 220 VAC,48 hrs test for samples,24 hrs test for pilot run samples 4 hrs test for mass production.100%烧机测试在负载为80-100%状况,烧机房温度为35-40℃,输入电压为220 VAC;工程样品测试时间为48小时,导航样品为24小时,批量产品为4小时。 |
|||
Temperature rise/温升:In environmental temperature at 25 degrees.The maximum temperature rise measured at any point on the enclosure surface shall not exceed 50 degrees in closed carton chamber and no air flow.在环境温度为25度下,外壳表面任意一点它的最高温升不超过50度,实验品是置于封闭的空气不流通的容器中进行. |
|||
2.Mechanical Characteristics/机械特性: |
|||
Items/项目 |
Specification/规格 |
Remarks/备注 |
|
Dimension/尺寸 |
116*63*38mm only FYI |
Length*Width*Height/长*宽*高 |
|
Case Material/外壳材料 |
PC,PC+ABS, or equivalent |
Desk top/桌上型 |
|
Input Plug/输入插头 |
18AWG SPT-2 105℃ 2PIN UL POLARITY |
BLADE / 1200 + 100mm |
|
Output Cord/输出线 |
18AWG SPT-1 105℃ / 1500+100mm |
DC头 |
|
Connector polarity/连接器极性 |
|
5.5*2.1*11 mm only FYI |
|
Color/颜色 |
Black |
Fine texture/颜色均匀无色差。 |
|
Drop test/跌落试验 |
One time Per side, at one meter. 1米一次, 每个面。
After test, unit is not broken, disassembled, or damaged to access hazardous parts.
测试后,产品不可以损坏,裂开或者可以触到危险部件。 |
||
3.Environmental Characteristics/环境特性: |
|||
Storage temperature/存储温度 |
-20 to +60 degrees centigrade(摄氏度) |
|
|
Operating temperature/操作温度 |
0 to +40 degrees centigrade. (摄氏度) |
|
|
Storage RH range/相对存储湿度 |
5 to 95% |
RH: Relative humidity/相对湿度 |
|
Operating RH range/相对操作湿度 |
20 to 85% |
|
|
Approved by: 核准审核制作 |